CAS#: 1344-28-1
The wear-resistant powder for coatings is obtained by processing aluminum oxide. It is used in coatings, primers and topcoats to enhance wear resistance, increase hardness, good dispersion, high product hardness, and good transparency. At present, the floor surface Lacquer primer, non-stick pan top paint primer is used a lot, the effect is good,
It has little effect on the gloss, brightness and rheology of the coating. Adding this product can improve the abrasion and scratch resistance of the coating without affecting the transparency of the paint film. At the same time, it has the characteristics of no precipitation and no stickiness.
Item | VK-L15T | VK-L16T |
Appearance | white powder | white powder |
content﹪ | > 99 | > 99 |
the paricle size | 1-5um | 45-50um |
application areas:
1. Adding special wear-resistant powder for coatings can strengthen the coatings and improve the hardness and wear resistance of the coatings. The hardness increases with the increase in the amount of addition.
2. Adding special wear-resistant powder for paint does not affect the adhesion and transparency of the paint coating.
3. Adding special wear-resistant powder for coatings can reduce the volume shrinkage of the coating during curing and improve the adhesion between the coating and the substrate
4. The addition of special wear-resistant powder for coatings increases, and the thermal stability of the coating is improved.
Addition amount: The recommended addition amount is 2-10%, and the user can determine the addition amount through experiments according to different systems.
