Photocatalyst High Activity Nano Titanium Dioxide Nanoparticles Powder
You are here: Home » Products » Highly Active Nano Titanium Dioxide Nanoparticles » Photocatalyst High Activity Nano Titanium Dioxide Nanoparticles Powder
Share to:

Photocatalyst High Activity Nano Titanium Dioxide Nanoparticles Powder

  • JR05
  • Jinghe
Product Description

CAS# :13463-67-7


particle size: average particle size5nanometers.

good dispersion performance:5 nanometer titanium dioxide has good dispersibility and can be self-dispersed into pure water without stirring.dispersed liquidcan be sprayed on the surface of furniture and walls to form a uniform nano coating to purify indoor air.

high catalytic activity:5nano-titanium dioxide has been tested, which can capture and degrade indoor

formaldehyde, benzene, ammonia and other harmful gases, good deodorization effect.



100g powder dissolves10kg of purified water, or distilled water, deionized water, etc., is made into solid content1%aqueous solution is directly sprayed on walls, home surfaces, and car rooms.


1, pay attention to indoor dark furniture and high-finish furniture. The recommended caliber is0.5 mm-1mmof the imported spray gun for construction, spraying uniform atomization construction, can not produce sagging and uneven.

2, metal stainless steel and other parts are recommended not to be sprayed, and protection should be done before construction.

3, furniture construction mainly deals with the rough surface of furniture, the side, back, inside and bottom of furniture.

4, wallpaper is recommended0.5%or lower concentration spray, or not spray.

5, do not spray on the human body, if spray on the eyes, use running water to fully wash.

6, when spraying, if the distance from the spraying surface is too close, the spraying liquid will flow and leave traces. If the distance from the spraying surface is too far, white spots or adhesion will decrease. Therefore, the spraying distance shall be observed according to the construction specifications.

7,JR05photocatalyst is sprayed, clean the spraying equipment with clean water to prevent nozzle blockage and corrosion.

8, when the solution of this product is sprayed on other objects that are not sprayed or flowed to other objects during construction, it shall be wiped clean in time.

9, where there is moisture, spray after full drying, spray after spraying2hours.

10, avoid the construction of closed space, fully ventilation after construction.

11,100square meters of construction area, recommended to use100gThe amount of photocatalyst powder is determined according to the excess.

12,construction should wear goggles, long-sleeved trousers, masks, gloves and other protective equipment.







Xuancheng JingRui New Material Co. Ltd. is a high-tech enterprise focusing on the research and development of nanotechnology. Nowadays we own an R&D group featured with expert and pioneering spirit.



 Add: Qilin Road,Xuancheng High-tech Economic and Technological Development Zone,Xuancheng ,Anhui ,China

 Tel:+86 13305631332 / +86 13305631650
WhatsApp/Skype: +861330631332



Copyright © 2021 Xuancheng JingRui New Material Co. Ltd. All rights reserved.  Sitemap  |  Support By Leadong